Citrix 1Y0-204 Exam Questions Instant Access

Question 1

A Citrix Administrator is configuring a Citrix ADC high availability (HA) pair and needs to ensure that one Citrix ADC is UP and primary at all times to ensure the business websites are always available.

What does the administrator need to do to ensure that the Citrix ADCs still handle web traffic in the event that both nodes become unavailable or fail a health check?

ADisable HA Fail-safe mode on the Primary Citrix ADC only.

BConfigure HA Fail-safe mode on each Citrix ADC independently.

CConfigure HA Fail-safe mode on the Primary Citrix ADC only.

DDisable HA Fail-safe mode on the Secondary Citrix ADC.

Answer : B

HA Fail-safe mode is a feature that allows the Citrix ADCs to continue processing traffic even if both nodes become unavailable or fail a health check. This feature can be configured on each Citrix ADC independently, and it is recommended to enable it on both nodes for maximum availability. If HA Fail-safe mode is disabled on one node, that node will not process any traffic if it becomes unavailable or fails a health check, and it will not fail over to the other node. This could result in a loss of service for the business websites. Therefore, the correct answer is B.

Question 2

Which method, according to Citrix leading practices, can a Citrix Administrator use to successfully make a configuration change for a StoreFront server group?

AMake the change on one StoreFront server in the group, then restart all servers in the group to synchronize the change.

BMake the same change manually on all StoreFront servers in the group, then run a Site health check.

CMake the same change on all StoreFront servers in the group using remote PowerShell commands.

DMake the change on one StoreFront server in the group, then use the Propagate Changes feature.

Answer : D

According to Citrix documentation, to make a configuration change for a StoreFront server group, the change should be made on one StoreFront server in the group, and then the Propagate Changes feature should be used to synchronize the change across the group1

Question 3

Scenario: A Citrix Administrator needs to configure persistence on a Global Server Load Balancing (GSLB) virtual server to which a service is bound, so that the service continues to serve requests from the client event after it is disabled manually, accepting new requests or connections only to honor persistence. After a configured period of time, no new requests or connections are directed to the service and all of the existing connections are closed.

Which parameter can the administrator configure while disabling the service to achieve this requirement?

ARequest Threshold

BPersistence Time-Out

CPersistence Threshold

DWait Time

Answer : B

According to the Citrix documentation1, persistence time-out is the parameter that determines how long the service continues to serve requests from the client after it is disabled manually. The service accepts new requests or connections only to honor persistence. After the persistence time-out expires, no new requests or connections are directed to the service and all of the existing connections are closed. This parameter is available only when the service is disabled gracefully. The default value is 2 minutes. The other options are not related to the scenario described in the question.

Question 4

Which tool should a Citrix Administrator use to monitor the overall daily performance of a Citrix Virtual Apps and Desktops Site?

ACitrix Studio

BHDX Monitor

CCitrix Director

DCDF Traces

Answer : C

Citrix Director is the tool designed for monitoring the overall daily performance of a Citrix Virtual Apps and Desktops Site.It provides administrators with insights into the environment's operations, allowing for proactive management and troubleshooting

Question 5

Scenario: A Citrix Administrator configured the following policies in a Citrix Virtual Desktops Site environment, in descending priority order.

1. ''Marketing Office A'' has a filter on Marketing users. 'Client Network Drives' is disabled; 'Client Fixed Drives' is enabled.

2. ''Marketing Office B'' has a filter on Marketing users' internal IP. 'Client Network Drives' is disabled; 'Client Fixed Drives' is enabled.

3. ''Accounting'' has a filter on Accounting Users. 'Client Network Drives' is enabled; 'Client Fixed Drives' is NOT configured.

4. ''Baseline'' is configured without a filter. 'Client Network Drives' and 'Client Fixed Drives' are both disabled.

Based on these policies, what will Accounting users be able to access?

AClient network drives only

BNeither the client network drive nor the client fixed drive

CClient fixed drives only

DClient fixed and network drives

Answer : A

According to the policy priority and filtering, the Accounting users will match the policy ''Accounting'', which has 'Client Network Drives' enabled and 'Client Fixed Drives' not configured. The policy ''Baseline'' will not apply because it has a lower priority. Therefore, the Accounting users will be able to access only the client network drives, and not the client fixed drives. This is confirmed by theCitrix documentationon policy filtering and precedence.

Question 6

Scenario: A Citrix Administrator has executed the following command:

What will be the outcome of this configuration?

AThe users trying to access HTTP://SERVER.CITRIX.LAB will NOT be connected to the Vserver MYVPN_http.

BThe users trying to access HTTP://SERVER.CITRIX.LAB will be connected to the Vserver MYVPN_http.

CThe users trying to access http://server.citrix.lab will be connected to CS Vserver Vserver-CS-1.

DThe users trying to access HTTP://SERVER.CITRIX.LAB will be connected to CS Vserver Vserver-CS-1.

Answer : B

According to the Citrix documentation, the commandbind cs vserver MYVPN_http -lbvserver Vserver-CS-1binds a load balancing virtual server to a content switching virtual server. This means that the content switching virtual server will forward the requests that match its policies to the load balancing virtual server. In this case, the content switching virtual server MYVPN_http has a policy that matches requests for http://server.citrix.lab, so it will forward those requests to the load balancing virtual server Vserver-CS-1. Therefore, the users trying to access http://server.citrix.lab will be connected to the Vserver MYVPN_http, which will then connect them to Vserver-CS-1.

Question 7

Which tool can a Citrix Administrator utilize to verify that a policy is bound and showing the number of hits?

Anstcpdump.sh

Bnstrace.sh

Cnsconmsg

Dnscollect

Answer : C

The nsconmsg tool can be used to display the policy bound hits on a Citrix ADC appliance. This tool can show the number of times a policy was evaluated and the number of times it was hit.The nsconmsg tool can also display other statistics and information about the Citrix ADC configuration and performance1

1:Citrix ADC Command Reference

Citrix Virtual Apps and Desktops 7 Administration 1Y0-204 Exam Questions