CWNP CWDP-303 CWDP Wi-Fi Design Exam Questions Instant Access

Question 1

When designing a static channel plan for an office using voice devices near an airport, which range of channels should be avoided to ensure optimal performance when implemented?

A36-40

B44-48

C116-124

D1-11

Answer : C

Question 2

Your new customer is concerned about maintaining privacy for their proprietary information when you conduct information gathering for their WLAN design. Which document can you use to directly address their concern?

ANDA

BSoW

CBoM

DHold Harmless

Answer : A

Question 3

What is the best method of gathering attenuation measurements from any building materials or objects?

AAfter measuring the RSSI in free space 5 meters (16.5 feet) apart, put an AP 4 meters (13 feet) away from the wall or object on one side and your measuring device 0.67 meters (2 feet) away from the wall or object on the other side. Take measurement and compare the difference.

BUse the pre-built attenuation values in the predictive design tool.

CAfter measuring the RSSI in free space 1 meter (3 feet) apart, put an AP 0.32 meters (1 feet) away from the wall or object on the other side. Take measurements and compare the difference.

DLook on the Internet for attenuation values for each one of the materials that might attenuate the Wi-Fi signal using the material provider's websites.

Answer : C

Question 4

You are validating association capabilities from clients to an 802.1X/EAP secure SSID. The RADIUS server's IP address is 10.100.50.25 and the default RADIUS authentication port is used. When testing them, none of the clients are able to associate to the SSID. Troubleshooting the WLAN infrastructure, you found out that the server is up and the RADIUS service is up as well, but the authenticator is not able to communicate properly with the server. What's your next troubleshooting step?

AVerify that the shared secret between the authenticator and the RADIUS server is correct

BReboot the clients

CReboot the server

DRestart the RADIUS service

Answer : A

Question 5

A customer is acquiring a new VoWLAN system to replace their existing wired phone system. When reading about his system's requirements, you learned that is requires 25 db of SNR to work as expected. After surveying the environment, you discovered that the noise floor is -88 dBm. What should be the minimum RSSI value to meet the system's requirements?

A-70 dBm

B-67 dBm

C-65 dBm

D-63 dBm

Answer : B

Question 6

What document should be created that provides instructions for install technicians to mount and configure APs?

AHold Harmless

BStatement of Work

CBill of Materials

DPhysical installation guide

Answer : D

Question 7

In what circumstance would you not enable DFS channels on a WLAN infrastructure?

AIn any stadium

BIn any office complex

CIn an airport

DIn any home office

Answer : C

CWNP Certified Wireless Design Professional - Wi-Fi Design CWDP-303 CWDP Wi-Fi Design Exam Questions