Dell EMC Dell VxBlock Deploy Achievement D-VXB-DY-A-24 Exam Questions

Answer : C

The label on the cable indicates two parts: ''M91A-01:01'' and ''U61A-01:09''. The first part of the label ''M91A'' refers to a specific type of equipment as per the exhibit. According to the exhibit, ''M9'' corresponds to ''MDS 9xxx'', which is a Cisco Multilayer Director Switch. The second part of the label, ''U61A'', does not directly match any category in the provided list; however, it seems to be an internal reference that could be related to user-specific configurations or locations.

Since we are looking for the target equipment type and not where it was mistakenly connected, we focus on the first part of the cable label. The numbers following ''M91A'' indicate slot and port information. Therefore, based on this labeling system and referring to the exhibit provided, which lists various EMC and Cisco equipment types along with their corresponding codes (like AP for APIC Appliance or CN for Cust. Network), we can deduce that ''M91A'' stands for ''MDS 9xxx''. The subsequent numbers ''-01:01'' suggest Slot 1, Port 1.

Answer : B

VxBlock Central requires 3 VMs to support an RCM (Release Certification Matrix) upgrade. These VMs include the various management and orchestration components necessary to facilitate the upgrade process and ensure that all aspects of the system are correctly monitored and controlled.

Dell EMC VxBlock Central documentation.

Best practices for deploying and managing VxBlock systems.

Answer : D

Integrating NSX for virtual networking while retaining ACI for physical networking is possible, but it may be cost prohibitive. This approach requires careful planning and management of both virtual and physical network environments, potentially leading to higher operational costs and complexity.

Technical resources on integrating VMware NSX with Cisco ACI.

Cost considerations and best practices for hybrid network environments.

Answer : B

Identify the VTEP's role: The VTEP, or VXLAN Tunnel Endpoint, is responsible for encapsulating and de-encapsulating the network traffic sent over the VXLAN1.

Understand NSX Components: The NSX Controller is a key component of the VMware NSX network virtualization platform. It is responsible for the control plane, managing the state of virtual networks and overlay transport zones1.

Communication with VTEP: The NSX Controller communicates with the VTEP to manage the overlay network and ensure that traffic is correctly routed and encapsulated across the network infrastructure1.

Role of other NSX Components: While the NSX Edge provides routing services and the NSX Manager is the centralized management component, it is the NSX Controller that directly manages the state of the virtual network and communicates with the VTEPs1.

Answer : D

The data layout technique used on an Isilon cluster is Forward Correction Error (FEC). This method ensures data integrity and availability by distributing error correction information across the nodes in the cluster, allowing for data recovery in the event of hardware failures.

Dell EMC Isilon OneFS technical documentation.

Information on data protection techniques in distributed storage systems.

Answer : D

Access SolVe Online: SolVe Online is Dell EMC's online tool that provides step-by-step procedures and support for various products, including VxBlock Systems1.

Navigate to VxBlock Section: Within SolVe Online, navigate to the section dedicated to VxBlock Systems to find resources specific to these models1.

Locate Test Plan: Look for the Test Plan associated with the specific VxBlock model you are working with. The Test Plan is typically available in the form of downloadable documents or guides1.

Download Test Plan: Once located, download the Test Plan for the specific VxBlock model to use as a reference for deployment or troubleshooting1.

Verify with Documentation: Ensure that the downloaded Test Plan matches the model and version of the VxBlock System you are using by cross-referencing with the official documentation1.

Answer : B

Review Deployment Phase Requirements: The final implementation step during the Deployment Phase of a VxBlock 1000 involves ensuring that the system is functioning as expected1.

Identify Required Task: A critical task in this step is to execute the test plan that was agreed upon during the planning phase1.

Understand the Importance of Test Plan Execution: Executing the test plan is essential to validate that all components of the VxBlock 1000 are working correctly and that the system meets the customer's requirements1.

Reference Official Dell Documentation: The Official Dell VxBlock Deploy Achievement document outlines the importance of executing the test plan as a required task in the final implementation step during the Deployment Phase1.