Dell EMC DES-1221 Specialist - Implementation Engineer, PowerStore Solutions Version 1.0 Exam Practice Test

Page: 1 / 14
Total 61 questions
Question 1

You are a network administrator that needs to setup a Data switch model S5248F-ON to be used for PowerStore 7000T system Use the Simulator to:

1) Check the OS version and license status.

2) Set management IP address 172.17.57.10 subnet as 255.255.255.0 on chassis = 1, slot = 1, port = 10

3) Enable the port

4) Configure default route with gateway 192.168.1.254, NTP server 192.168.1.50

5) Enable RSTP with priority 4096

6) Commit and exit.



Answer : A


Question 2

Use the PowerStore Manager simulator to configure the BaseEnclosure-NodeA-IoModule1-FEport0 as a replication port. When you have finished using the simulator, Click Next.



Answer : A


Question 3

In a PowerStore T source cluster, create a 100GB volume with name "Prod_vol" and set a protection policy to replicate the volume with RPO 30 minutes to a destination cluster. The destination cluster is already configured. When you have finished using the simulator, click Next.



Answer : A


Question 4

Use the simulator to determine how many logical ports are currently marked for replication on the PowerStore appliance.

Note: It is necessary to close (x) the simulator window before you can select a response to this question.

Simulator:



Answer : B


Question 5

Use the simulator to generate and download logs from all appliances in the PowerStore cluster. When you have finished using the simulator, Click Next.



Answer : A


Question 6

An administrator received a request to provision a new volume. Use the simulator to provision a volume of 50 GB with a performance policy of high for their host named "ApplicationTeam". When you have finished using the simulator, click Next.



Answer : A


Question 7

An administrator received the following alert from PowerStore regarding a previously created NAS server?

Description:

The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.

Which setting should the administrator change?



Answer : D


Page:    1 / 14   
Total 61 questions