Dell EMC DES-6321 Exam Questions Instant Access

Question 1

You are designing a VxRail Stretched Cluster for a company with two datacenters. The primary datacenter will

host all the workloads; the secondary datacenter will be for disaster recovery.

Where should you host the witness virtual appliance?

ABoth datacenters

BSecondary datacenter only

CPrimary datacenter only

DCloud

Answer : B

Question 2

A VxRail Stretched Cluster will be configured with four All-Flash nodes at each site based on the following

requirements:

PFTT = 1

SFTT = 1

FTM = Erasure Coding

Based on the required usable capacity, what should be the planned capacity of the design?

ASingle Site Capacity = 150%
Total Cluster Capacity = 300%

BSingle Site Capacity = 133%
Total Cluster Capacity = 266%

CSingle Site Capacity = 100%
Total Cluster Capacity = 200%

DSingle Site Capacity = 200%
Total Cluster Capacity = 400%

Answer : C

Question 3

After powering on Dell PowerEdge-based VxRail nodes, what defines the primary node of the cluster being

configured?

AMarvin

BPTAgent

CLoudmouth

DElection Process

Answer : C

https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-information/products/converged-infrastructure/h15300-vxrail-network-guide.pdf

Question 4

In which VxRail node model is the iDRAC 'NIC Selection Setting' set to LOM1?

AS570

BE560

CG410

DG560

Answer : B, D

Question 5

When resetting a Dell PowerEdge-based VxRail node to an existing factory image, which boot device should

be selected?

ABOSS

BRASRUSB

CSATADOM

DIDSDM

Answer : D

https://www.dell.com/community/VxRail/Reset-VxRail-V470F-node-to-default-factory-configuration/td-p/7171517

Question 6

When populating the VxRail First Run Wizard for an External vCenter solution what is the recommended format for hostnames?

AvCenter, PSC, and VxRail Manager use host name only

BvCenter and PSC use FQDN; VxRail Manager uses host name onl

CVxRail Manager and vCenter use FQDN; PSC uses host name only

DvCenter. PSC, and VxRail Manager use FQDN

Answer : A

Question 7

You are validating that a network environment is ready for a 4 node VxRail Model V570F deployment.

What types of DNS records must be created for VxRail components before implementation can begin?

AForward (A) records only

BForward (A) records and Reverse (PTR) records

CForward (A) and MX records

DNS records and Reverse (PTR) records

Answer : B

https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-information/products/

converged-infrastructure/h15300-vxrail-network-guide.pdf (30)

Dell EMC Specialist â€“ Implementation Engineer, VxRail Appliance Version 1.0 DES-6321 Exam Questions