Dell D-PST-DY-23 Exam Questions Instant Access

Question 1

Which two pieces of information are required to create a new remote system connection? (Choose two.)

AIP address of local system

BNetwork Latency

CIP address of remote system

DRemote PowerStore name

ERemote domain name

Answer : B, C

In the Add Remote System slide-out panel, configure the following fields:

- Remote system type - Select PowerStore.

- Management IP address

- Description (optional)

- Network latency

https://www.dell.com/support/manuals/en-us/powerstore-7000/pwrstr-protect-data/add-a-remote-system-connection-for-replication-and-metro?guid=guid-937b06e1-2a74-40e1-a8b6-9aae6f72e27d&lang=en-us

Question 2

During the discovery step of implementation, an unconfigured PowerStore is unavailable.

Which firewall ports must be open for a successful discovery?

ATCP port 5353 and UDP port 5353

BTCP port 8443 and UDP port 5353

CTCP and UDP ports 443 and 80

DTCP port 80 and UDP port 80

Answer : A

To properly discover a Dell PowerStore appliance using the Discovery Utility, you need to ensure that the following ports are open: TCP/UDP 5353: This port is used for mDNS (Multicast DNS) which is the protocol used by the PowerStore Discovery Utility to locate unconfigured PowerStore appliances. mDNS is essential for the appliance discovery process. (Grok 2)

mDNS (Multicast DNS): PowerStore uses mDNS for discovery, especially when the array is unconfigured. mDNS allows devices to discover each other on a local network without needing a pre-configured DNS server. This is essential for the initial setup and discovery of a new PowerStore system.

Port 5353: This is the standard port used for mDNS communication. Both TCP and UDP port 5353 need to be open for mDNS to function correctly.

Question 3

Which three features are included in PowerStore X licensing? (Choose three.)

AvSphere

BMetro node

C[Migration

DReplication

ESnapshots

Answer : A, D, E

Question 4

A PowerStore appliance is running out of storage capacity. The cluster consists of a PowerStore 5000T appliance with three NVMe expansion enclosures.

How can this issue be resolved?

AAdd additional SAS expansion enclosures.

BAdd an additional PowerStore appliance.

CEnable advanced deduplication.

DAdd additional NVMe expansion enclosures.

Answer : B

PowerStore 5000T and Expansion: The PowerStore 5000T model supports a maximum of three NVMe expansion enclosures. Since the appliance already has three, adding more is not an option.

Scaling Out: To increase capacity in this scenario, you need to scale out by adding another PowerStore appliance to the cluster. This will provide additional storage resources and processing power.

Question 5

What are the two parameters defined in a PowerStore replication rule? (Choose two.)

ARecovery Point Objective

BAlert threshold

CRecovery Time Objective

DDate and time of creation

Answer : A, B

Question 6

At what point in the configuration of an External Storage import session does the data path from the host to the PowerStore system become the active I/O path?

AWhen the import session begins

BAs MPIO restarts on the host

CBefore launching the Import Storage wizard

DDuring the ImportKit installation

Answer : A

https://www.dell.com/support/manuals/en-aw/powerstore-1000/pwrstr-import/overview-of-the-non-disruptive-import-process?guid=guid-b91e4e36-e984-40ae-a484-75d8731926d6&lang=en-us

Question 7

An administrator is asked to create NVMe-vVol host in PowerStore.

Which requirement must be met to complete the task?

AThe host must be using the ESXi operating system

BNVMe-vVol must be created on internal hosts

CTwo appliances must be available to allow NVMe-vVol migration

DSwitches must support NVMe/TCP protocol

Answer : A

Dell PowerStore Deploy 2023 D-PST-DY-23 Exam Questions