Dell DES-4421 Exam Questions Instant Access

Question 1

The iSM is available under which license(s)?

AOpenManage Enterprise-Modular

BiDRAC Express and iDRAC Enterprise

CiDRAC Enterprise only

DiDRAC Express only

Answer : B

Question 2

A company receives their first MX7000 chassis. They connect all the provided power supply cables into two different PDUs on different power grids for redundancy. Each of the six power supplies is cabled and has green LEDs. One Management Module is present along with all system fans. Grid redundancy is configured as the power redundancy mode. The chassis is fully populated with six compute sleds and one IOM but only two of the six sleds will power on.

What is the possible reason for this issue?

AAn additional IOM is required to power on and manage the remaining sleds.

BTwo Management Modules are required to power on the populated chassis.

CPower supply unit redundancy policy was not used.

DMixed high line and low line AC inputs in the same chassis is not supported.

Answer : C

Question 3

What is a benefit of using scalable fabric architecture in the MX7000?

AManagement of all servers and fabrics is done from the last chassis in the fabric

BManagement of all fabrics is done from the third fabric in the chassis

CManagement of all servers and fabrics is done from the lead chassis

DManagement of all fabrics is done from the last chassis in the fabric

Answer : C

Question 4

What is a benefit of SmartFabric Services Mode?

ATopology validation and self-healing

BLoad balancing for management layers

CLoad balancing for application layers

DAutomatic detection of packet collisions

Answer : B

Question 5

Refer to the exhibit.

How many internal server-facing ports are available on this I/O module for the MX7000 chassis?

C16

D24

Answer : C

Question 6

What can be used as the firmware update source for OME-M within an MX chassis?

AServer Update UtilityBaseline from a Catalog

BServer Update UtilitySystem Live Image (SLI)

CDell Update packageSystem Live Image (SLI)

DDell Update PackageBaseline from a Catalog

Answer : D

Question 7

An administrator is configuring a fully populated MX5016s storage sled to be accessed by four MX740c compute sleds. Each compute sled has an H745P Jumbo PERC installed. The disks in the storage sled are evenly distributed across all compute sleds using a Drive-Assigned storage configuration.

What is the maximum number of disks that each compute sled can detect from the MX5016s?

D16

Answer : D

Dell Specialist - Implementation Engineer PowerEdge MX Modular DES-4421 Exam Questions