HP HPE0-J58 Exam Practice Test Instant Access

Question 1

A customer wants to take advantage of ISL aggregation within a Brocade switch configuration. The customer has added the necessary licenses to allow the forming of trunks in the configuration. You have already provided the standard SAN design guidelines.

Which additional recommendation should you suggest to the customer?

APlace the non-trunking switches at the core of the fabric.

BUse redundant trunk groups in redundant fabrics to increase availability

CPlace the trunking-capable switches at the edge of the fabric

DAdd paths to trunks, so the paths that are longer will cause traffic to be rerouted.

Answer : B

Question 2

A customer wants to convert all of the virtual volumes on an HPE 3PAR 8460 from RAID 5 to RAID 6. You have already created the new raid 6 CPG on the array.

Which CLI command should you use to accomplish this?

Atune so

Bconvert_vv

Ctunew

Dtunepd

Esetvv

Answer : C

Question 3

A global customer needs to establish a connection between two SAN islands that are 100O km apart. Which protocol should be used?

ARCIP

BFC over CWDM

CFCIP

DFCoE

Answer : B

Question 4

A customer's fabric consists of HPE B-Series switches running Fabric OS 7.4. The customer recently closed a second datacenter and needs to repurpose the hpe c-series switches that were used at the second site.

What should you do to meet the customer's needs and maintain full fabric functionality?

Aconnect the B-series switch based fabric and the c-series switch based fabric with DWDM.

BCreate a SAN with one fabric containing B-series switches only and a second fabric containing C-series switches only. Connect end devices to both

CEnable interaparatibility mode on both B-series and C series switches, and connect them together directly to form a single fabric

DConnect the B-series switch based fabric and the C-series switch based fabric, and use FC-FC routing

Answer : C

Question 5

A customer is interested in deploying Peer Persistence to take advantage of automated transparent failovers. Which failure scenario will trigger an automated transparent failover?

AQuorum Witness communication is functioning, and there is an Array-to-Array communication failure.

BBoth sites lose communications to the Quorum witness, and Array-to-Array communication tans

CSingle site to Quorum Witness communication fails, and Array-to-Array communication is functioning

DSingle site to Quorum Witness and Array-to-Array communications fan

Answer : D

Question 6

A customer wants to upgrade an existing HPE 3PAR 7000 running HPE 3PAR OS 3.2.2. The customer agrees to run an assessment.

What are the requirements to gather configuration and capacity data and/or performance statistics?

Aconfigured password-less SSM

Benabled rest API interface

Cenabled Telenet protocol

Dconfigured FTP Server

Answer : D

Question 7

A customer's environment has.

* one HPE 3PAR 9000 series funning OS 3.3.1. direct-connected to a single host

* two HPE 3PAR 20000 series fc arrays recently upgraded to OS 3.2.2

The customer recently purchased a third HPE 3PAR 20000 series fc array running OS 3.2.2 and wants to incorporate all four as Storage Federation members.

What should you do before implementing Storage Federation?

AChange Direct connection to FC-based array

BUpgrade arrays to match highest OS version

CInstall a Peer Motion License only on the 20000 series array.

DDecommission the HPE 9000 series array.

Answer : D

HPE0-J58 Designing Multi-Site HPE Storage Solutions Exam Practice Test