HP HPE0-S22 Exam Questions Instant Access

Question 1

A customer has an HPE Integrity Superdome X system with an nPartition that has been provisioned with a supported OS and application.

What first detects data corruption caused by an installed DIMM module?

Athe XNC2 controller in the internal fabric

Bthe application using the data

Cthe OS installed on the nPartition

Dthe Superdome X firmware

Answer : D

Question 2

A customer needs high performance computing (HPC) and a small-scale solution with up to eight processors. The solution should also provide storage in a modular form factor. The customer's HPC application is designed so that some nodes act as compute nodes while others act as storage nodes that serve data to the compute nodes.

Which HPE Apollo system is most appropriate for this situation?

AHPE Apollo r2200

BHPE Apollo r2800

CHPE Apollo 6000

DHPE Apollo 8000
The Apollo r2200 and r2800 would both be a possible candidate with 4 x dual CPU servers, but the request is that some nodes must be compute nodes and some must be data nodes. The r2200 has fixed disks to every node, whereas the r2800 can be flexible e.g. 2 nodes with two disk drives and two nodes with 4 disk drives.

Answer : B

Question 3

A customer requires a server infrastructure update for its Hadoop HBase solution. The HBase maximum

dataset size will be 120TB.

To host HBase, the architect is planning three HPE Moonshot 1500 chassis fully populated with cartridges.

The populated chassis provide the following in total:

- 135 processors with four 2.9GHz cores each

- 4.23TB RAM

- 64.8TB local storage on SSDs

An aspect of the design is under provisioned and is likely to cause performance to degrade to one-tenth or even one-hundredth of its potential.

How can the architect resolve this problem?

AScale the memory capacity by selecting higher capacity DIMM's for the cartridges

BSelect different cartridges that provide more nodes per cartridge

CScale the SSD capacity by adding cartridges or selecting higher capacity SSDs

DSelect different cartridges that provide more processor cores

Answer : C

Question 4

A customer operates a data center based on third-party servers, which includes third-party storage with an iSCSI SAN.

The architect needs to design a solution that can seamlessly access the current data from a new HPE Moonshot system.

How can the HPE Moonshot system access the legacy storage?

Ausing native iSCSI target software to connect to the storage on a dedicated LAN

Busing native iSCSI initiator to connect to the storage on a dedicated LAN

Cusing native iSCSI initiator to connect to the storage on the management LAN

Dusing an HPE Multifunction router to convert iSCSI to Virtual Connect

Answer : B

Question 5

Under which Transformation Area do HPE Moonshot solutions with Citrix fail?

AProtect your digital enterprise.

BEmpower a data-driven organization.

CEnable workplace productivity.

DTransform to a hybrid infrastructure

Answer : A

Question 6

View the Exhibit.

Refer to the exhibit. An architect is planning an HPE Moonshot System with m710 cartridges to support a customer application virtualization solution. The customer indicated that the maximum acceptable response time for the solution is three seconds. The architect has implemented a POC and tested a single cartridge with different numbers of user sessions.

The architect monitored resource utilization throughout the tests. The results of the test with the point at which the response time exceeded three seconds are shown, marked as the "VSI max."

What should the architect conclude from this test?

ACPU becomes a limiting factor around 50 sessions, so the architect should propose at least one cartridge per 45 or 50 users.

BNone of the monitored resources shows signs of being a bottleneck, so the architect should consider other factors such as the HPE Moonshot switch module.

CThe network adapter becomes a bottleneck before other resources, so the architect should propose m710p cartridges, which provide 10GbE ports.

DThe memory becomes a bottleneck before other resources, so the architect should propose m400 cartridges, which provide a higher memory capacity.

Answer : A

Question 7

A customer needs to streamline monitoring for its HPE Apollo 6000 solution.

Which benefit can HPE Advanced Power Management (APM) provide to this customer?

AIt discovers and inventories XL servers installed in the HPE Apollo chassis.

BIt monitors the utilization of resources such as CPU and memory.

CIt enables HPE OneView to automatically discover and map the chassis and its servers.

DIt audits the firmware on XL servers installed in the HPE Apollo chassis.

Answer : A

HP Architecting Advanced HPE Server Solutions HPE0-S22 Exam Questions