HP HPE0-S57 Exam Practice Test Instant Access

Question 1

Which industry standard protocol is typically used to communicate with remote resources on mobile applications?

ATRILL

BHTTP

CSTP

DNFS

Answer : B

'Mobile applications typically communicate with remote resources using HTTP, rather than NFS [...]'

Question 2

You propose an HPE 3PAR StoreServ 8200 array for a customer who needs 900 TiB raw storage space. After the proposal was created, the customer went through with a competitor acquisition. Now they need to accommodate 1600 TiB.

What should you propose to the customer?

AInstead of 3PAR StoreServ 8200 2-node configuration, propose an 8400 4-node configuration with the needed amount of drives.

BInstead of 3PAR StoreServ 8200 2-node configuration, propose an 8400 2-node configuration with a 2-node upgrade and the needed amount of drives.

CUpgrade the 3PAR StoreServ 8200 2-node configuration with four additional nodes and the needed amount of drives.

DUpgrade the 3PAR StoreServ 8200 2-node configuration with Data Optimization Software Suite and the needed amount of drives.

Answer : A

Question 3

What must be taken into account when using the HPE FlexFabric 5945 4-slot Switch as a ToR switch in a solution?

Aadding in a Network Analytics Engine license

Bspecifying a fan tray with the appropriate direction of airflow

Cadding in an Intelligent Resilient Framework license

Dselecting power supplies with adequate reserve PoE+ capacity

Answer : B

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00047323enw

Question 4

During an HPE SimpliVity solution presentation, a potential customer asks about the HPE SimpliVity RapidDR option in the Bill of Material.

How should you respond?

Ait allows configuring a high-availability solution between two sites for automatic failover and fallback in disaster recovery situations.

BIt is a requirement to guarantee the l -minute restore of a 1TB virtual machine

CIt is required for a multi-site HPE SimpliVity configuration to send VM backups to remote clusters.

DIt enables orchestration for site-to-site recovery to improve application availability during planned or unplanned events

Answer : B

Question 5

A customer is interested in a Synergy solution. They need 100 compute modules and expect the workload to double in two years.

They ask for the minimum number of management ports they will need to connect Synergy frames into their management network.

How should you reply?

AFLMs from all frames connect into a management ring, and the management ring connects into their management network with two uplinks.

BFLMs from all frames connect to two external switches, and these two switches connect into their management network.

CSynergy solution only allows 15 frames to be interconnected, so growth in customer's workload is not supported.

DThe RJ-45 ports on the front of each frame are connected to an external switch, which is connected into their management network.

Answer : A

Question 6

A customer asks you about the features of the HPE SimpliVity, such as performance, availability, efficiency, and protection.

Which statement is correct about an HPE SimpliVity solution that enables these features?

AThe OmniStack Accelerator Card (OAC) contains a FPGA programmed with HPE SimpliVity deduplication, compression, and optimization algorithms.

BThe OmniStack Accelerator Card (OAC) connects directly to the iSCSI VIP address enabled by the OVC.

CThe OmniStack Accelerator Card (OAC) has direct hardware access to the two PCIe cards through VM direct path IO.

DThe OmniStack Virtual Controller(OVC) creates an iSCSI datastore where the hypervisor stores the workload VMs.

Answer : A

Question 7

Based on the scenario provided, which service should you recommend*?

AHPE 3PAR StoreServ Data Migration Service

BHPE File Data Migration Service

CHPE Migration Service for Exchange

DHPE Migration Service for Office 365

Answer : D

HP Designing HPE Hybrid IT Solutions HPE0-S57 Exam Practice Test