HP HPE0-S60 Exam Practice Test Instant Access

Question 1

In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.

Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?

APause flood protection

BsFlow

CStorm control

DPort flap protection

Answer : B

Question 2

Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?

APause flood protection

BLoop protection

CLLDP tagging

DStorm control

Answer : D

Question 3

Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.

When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.

What must be done to fix this issue?

ACheck the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.

BTo make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.

CThe newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.

DCheck within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.

Answer : C

Question 4

A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?

ABrocade 32GB Fibre Channel Switch Module for HPE Synergy

BHPE virtual Connect SE 32 Gb FC Module for Synergy

CHPE Virtual Connect SE 100 Gb F32 Module tor Synergy

DHPE Synergy 12 Gb SAS Connection Module

Answer : C

Question 5

You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group

What should you check to fix the issue?

Aif both FiexNICs are configured with the same speed

BIf the logical enclosure is built on at least three HPE Synergy frames

Cif both FiexNICs are connected to different networks

Dif the logical enclosure is configured with redundant master modules

Answer : A

Question 6

Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives

The customer requested the following components:

- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules

- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy

- An appropriate number of vSAN Standard licenses for each compute node

- One HPE O3940 Storage Module with 40 SSDs - All required cables and options

Which statement about this request is true?

AvSphere licenses should be added, as vSAN licenses do not replace vSphere licenses

BvSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN

COne HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

D20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.

Answer : B

Question 7

Your customer wants to add a second HPE Synergy frame to an existing logical enclosure Based on a single HPE Synergy frame. The customer wants to use a highly available master setup.

Which procedures should De performed during the expansion process? (Select two.)

ACreate a new logical interconnect group and enclosure group for two frames setup

BCreate a new logical enclosure based on both HPE Synergy frames.

CRe-parent an existing enclosure group to the new logical interconnect group.

DModify an existing logical interconnect to include second HPE Synergy frame.

EMove one of the master modules to the appropriate interconnect bay in the second frame.

Answer : B, D

HP Delta - HPE Compute Solutions HPE0-S60 Exam Practice Test