HP HPE2-T36 Exam Practice Test Instant Access

Question 1

A customer has HPE OneView 1.2 and wants to upgrade to 4.0. What is the correct procedure?

Aimport all virtual connect manager environments and then upgrade directly to 4.0

Bupgrade directly to 4.0

Cupgrade to 3.1, import all virtual connect manager environments, then upgrade to 4.0

Dupgrade to 3.1 and then upgrade to 4.0

Answer : B

Question 2

Which security feature would you configure to delegate responsibility for a subset of resources to a junior administrator group?

ANo Password for admin account

BRBAC (Role Based Access Control)

CSBAC (Scope Based Access Control)

DCLl Only Access

Answer : C

Question 3

Which HPE OneView feature enables the detection of lost Ethernet connectivity on interconnect uplink ports?

AQoS

BM-LAG

CSmart Link

DVxLAN

Answer : C

Question 4

An SY480 compute module is having issues and needs to have the motherboard replaced in the interest of time, you decide to move the hard drives to a spare compute module. To prevent losing data, what do you need to do before applying the same profile to the new blade?

ACheck ''Re-initialize controller on next profile application'' in the ''Local Storage'' section of the Server Profile.

BCheck ''Import existing logical drives'' in the ''Local Storage'' section of the Server Profile.

CEnsure that the RAC level is configured ''or RAID1 then select the ''Boot'' checkbox in the ''Local Storage'' section of the Server profile.

DSelect ''Create logical drive'' in the ''Local Storage'' section of the Server Profile, then uncheck ''Manage integrated storage controller''.

Answer : B

Question 5

Where can an administrator select the firmware baseline for a specific Synergy compute node?

ALogical Interconnect Group

BServer Profile

CImage Streamer

DIntelligent Provisioning

Answer : B

Question 6

An administrator wants to create new volumes using a server profile. What limitations must the administrator consider?

AOnly private volumes can be created through a server profile.

BVolumes created through the server profile cannot be bigger than 1TB.

CA volume template must be used to create new volumes using server profile.

DCreating shared volumes using server profiles is possible only with Flat SAN implementation.

Answer : A

Question 7

You assign a server profile to an existing BL Gen 8 server within a managed enclosure with Affinity set to ''Device Bay + Server Hardware''. What would happen if you replace the server in the enclosure with a new BL Gen 10 server hardware resource?

AIt will apply the profile if the correct server hardware type is installed.

BIt will prevent the profile if the server is configured with Secure Boot mode in the BIOS.

CIt will prevent the profile from being applied if a different server is inserted to that bay.

DIt will apply the profile if a server with the correct serial number installed.

Answer : B

HPE2-T36 Using HPE OneView Exam Practice Test