Huawei H13-629 Exam Questions Instant Access

Question 1

VIPs in Oracle a RAC systems are created by VIPca scripts during the final stages of installing clusterware and are registered as CRS resources and bind to the public network card for each node.

ATrue

BFalse

Answer : A

Question 2

True or false, with RedHat 6 using the storage array Huawei S5500T, when the storage array and the host are directly connected, the storage array host port can select a P2P network topology.

ACorrect

Bmistakes

Answer : B

Question 3

An Engineer installed a OceanStor 9000 for a customer (a total of 5 OceanStor 9000 C Node, front and rear ends are 10GE TOE networking, on-site installation TOE network card). Then connected the signal lines, power lines, and debugged the software. During the installation there were issues. Which of the following description of these issues are correct? (Multiple choice.)

A5 devices TOE NIC A0, B1, and A0, B3 inserted into the PCIe slot will not affect the system. Deployment will not affect the network bandwidth, so it cannot be adjusted.

BThe signal cables are long and need to be strapped to the cabinet or placed on the bottom tray.

CLabel NODE 01 A0-0 The signal cable is inserted in the network port A0-1. The signal cable labeled NODE01 B3-1 is inserted in the network position B3-0, due to the same network card two network port peer, you can place the wrong line, you cannot adjust.

DCE6850 switch connected to two stacked copper cables, one of which is needed to post-cold more cold, because it does not affect the network interoperability. You can base this software debugging.

Answer : B, D

Question 4

Huawei N8000 cluster NAS system which can meet the following requirements?

AA TV station needs 20 departments and 10-15 businesses in each department. Each business uses a separate file system

Ba program distribution system, windows and linux client distribution using cifs and nfs protocol to write the program video, but the two are not written into the videoComplex, FTP client and then read the video file prepared broadcast

CA school multimedia video-on-demand business, you need to provide network disk address to the school's 5000 teachers and students, for everyone at any time for online courses.

DA research institute of high performance computing business, Xu provide 8GB / s stable read bandwidth

Answer : B

Question 5

In an 8500 Clustered NAS System there are several modules in the cluster communication architecture that work together to implement cluster communication such as resource agent, HAD, Gab, and LLT. Describe the correct mechanism for these. (Multiple choice.)

AAgent-Agent monitors the resources of each system and provides the status to each machine's HAD

BHAD Cluster service that monitors and manages the cluster's NAS

CUnder the management of the master node of the cluster, Gab sends the communication information between the cluster members to the point communication

DLLT (Low-Latency Transport) sends information to all nodes in the cluster through a low-latency delivery protocol

Answer : A, B, D

Question 6

Which of the following is a description of the UltraPath multipath setting? (Multiple answers)

AThe mode of operation of the array can be in-controller load balancing or inter-controller load balancing.

BLoad Balancing Mode Including wheel training algorithm, the maximum queue depth algorithm, the maximum workload algorithm.

CAfter the connection is interrupted between the LUN home controller and the host, the host accesses the LUN through the peer controller. In this case, the over-trail software defaults the switched home controller of the LUN to the remote controller.

DWhen multipath detects a preferred controller failure recovery, the I / O is resumed immediately at the preferred controller by default.

Answer : A, C

Question 7

The following description of the AIX system command is incorrect:

AToc heck whether the UltraPath is installed successfully:#lslpp -l UPforAIX *

BTo check the disk is recognized correctly:# lsdev-Cc disk

CTo check the WWN number of the HBA:#lscfg -pvl fcs0

DTo modify the network card IP address:#lsdev -Cc if

Answer : A

Huawei HCIE-Storage (Written) V1.5 H13-629 Exam Questions