NetApp NS0-162 Exam Questions Instant Access

Question 1

Click the Exhibit button.

A company has three servers that are using the iSCSI protocol to connect to a 2 node NetApp ONTAP cluster. The server administrator notices that half of the paths are down. When you check the ONTAP cluster, you notice that the servers are togging into only the first controller.

Referring to the exhibit, which two steps do you take to troubleshoot the issue? (Choose two.)

AVerify that the UFs are up.

BVerify that the ISCSI data protocol has been enabled on the ports.

CVerify that each server has been rebooted.

DVerify that the controller has not been taken over.

Answer : A, B

Question 2

Exhibit.

You recently added a new ESXi host to your VMware vSphere cluster. However, you cannot mount any of the existing NFS datastores to the host. Referring to the exhibit, which action solves the problem?

AAdd NFSv4 to the access protocols.

BEnable Kerberos in the export policy.

CAdd SMB/CIFS to the access protocols.

DAdd HOST 3's IP address to the NFS export policy.

Answer : D

Question 3

Exhibit.

A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.

Referring to the exhibit, what is the problem?

AThe host IP address does not match the export policy rule.

BThe volume is in read-only.

CThe volume is not mounted In the namespace.

DThe logical Interface does not allow the NFSv3 protocol.

Answer : C

The volume is not mounted in the namespace. https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.cdot-famg-nfs%2FGUID-8E400D78-B405-4682-8F33-143783F2D580.html

Even if the volume was read only it could be mounted - also the client IP is in the desired range and LIF is configured for NFS.

Question 4

You have an Internet of Things (IoT) application that will use SMB shares on a remote ONTAP Select Instance. There are no name services and only a local network Is available at the remote IoT site.

In this scenario, which two features are supported by ONTAP software for the IoT application? (Choose two.)

AActive Directory users

BSMB Server in workgroup mode

CSMB3 Witness protocol

DCIFS local users

Answer : B, D

https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/Is_Workgroup_Mode_Supported_for_CIFS_or_SMB_in_ONTAP

Question 5

You want to configure Active Directory domain controller access for NetApp ONTAP cluster administration. In this scenario, which two actions would accomplish this task? (Choose two.)

AConfigure an authentication tunnel through an admin SVM.

BUse the vservar active-directory create command to create a computer account on the domain for a non-CIFS SVM.

CUse the vserver active-directory create command to create a computer account on the domain for a CIFS SVM.

DConfigure an authentication tunnel through an existing CIFS SVM.

Answer : B, D

https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-adm-auth-rbac%2FGUID-BC7B1934-DDE6-4AFB-A319-6C85D1ADACB6.html

Configuring an authentication tunnel

If you have already configured a CIFS server for a data SVM, you can use the security login domain-tunnel create command to configure the SVM as a gateway, or tunnel, for AD access to the cluster.

Creating an SVM computer account on the domain

If you have not configured a CIFS server for a data SVM, you can use the vserver active-directory create command to create a computer account for the SVM on the domain.

Question 6

Exhibit.

You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)

ASMB

BNVMe

CISCSI

DNFS

Answer : C, D

https://cloud.netapp.com/hubfs/ONTAP_Cloud_FAQs-final.pdf

Question 7

Which configuration Is supported using NetApp's All SAN Array (ASA)?

A24-node cluster

Bsingle node cluster

C2-node cluster

D12-node cluster

Answer : C

NetApp Certified Data Administrator, ONTAP NS0-162 Exam Questions