NetApp NS0-591 Exam Questions Instant Access

Question 1

Your customer states that the storage efficiency on their FAS 8200 is far below what they had expected for a VMware NFS datastore. They enabled deduplication three days ago. The job ran every night for only 10-20 minutes, and the space savings now is less than 5%.

What is causing the space savings to be so low?

AThey have enabled aggregate-level inline data compaction, so the savings are at the aggregate level.

BThey have enabled aggregate-level inline deduplication, so the savings are at the aggregate level.

CThey have not enabled volume-level compression.

DThey have not run a baseline deduplication to scan old data.

Answer : C

Question 2

Your customer has initiated several volume move commands to redistribute the workload in their 8-node cluster. To verify that this process is not affecting their client access, they were monitoring the network switches that provide client access, but they do not see the network load of the volume move command.

In this scenario, what is the reason for the behavior?

AThe volume move command uses the HA iWarp interconnect, not the client access switches.

BThe volume move command uses copy offload protocol, so it does not show up when monitored.

CThe volume move command uses the intercluster LIFs, not the data LIFs.

DThe volume move command uses the cluster interconnect switches, not the client access switches.

Answer : B

Question 3

Click the exhibit button.

A customer notifies you that Active IQ is showing a warning that a broadcast domain in their environment has been configured with ports from multiple VLANs.

Referring to the exhibit, which two statements are correct? (Choose two.)

AYou should move the e0M ports to a Broadcast Domain that is dedicated to only management traffic.

BA VLAN tag cannot be assigned to the e0M port, so the configuration is acceptable.

CYou should configure e0M so that is tagged on VLAN 40.

DYou should change the LIF service policy to net-intercluster to prevent the LIFs from failing over to the e0M ports.

Answer : C, D

Question 4

After you replaced the motherboard, the node stopped in the ''waiting for the cluster application to come online'' state.

Which two actions should you perform to troubleshoot this problem? (Choose two.)

ACheck the status of the HA with the interconnect-up field of storage failover show command.

BVerify the setting of the cluster interconnect switch.

CVerify that the physical links on the cluster ports are up.

DCheck the status of the cluster with the cluster ring show command.

Answer : A, D

Question 5

Which statement is correct about the wafliron command?

AThe wafliron command is used to correct parity inconsistencies.

BThe wafliron command is used to correct inconsistent WAFL metadata.

CThe wafliron command is used to correct WAFL i2p inconsistencies.

DThe wafliron command is used to correct inconsistent user data blocks.

Answer : B

Question 6

For restore purposes, a storage administrator on an ONTAP system created a FlexClone of a volume that contains a LUN from a specific snapshot. This LUN cannot be seen by a Windows client after a disk rescan is performed by using Disk Management.

In this scenario, which statement is correct?

AThe cloned LUN must be brought online.

BThe cloned LUN needs to be mapped to an initiator group.

CThe cloned volume must be split from the source volume before the LAN can be used.

DThe cloned LUN must be renamed to a different name than the name of the source LUN.

Answer : C

Question 7

A non-maskable interrupt event occurs. The system panics and then reboots.

In this scenario, what would have caused the panic?

Aa secd process

Ba watchdog timer

Can ICMP blackhole detector

Da volume location distributed database

Answer : B

NetApp Certified Support Engineerâ€”ONTAP Specialist NS0-591 Exam Questions