VMware 5V0-22.23 Exam Questions Instant Access

Question 1

After a planned power outage, an administrator decided to restart the vSAN cluster manually.

What is the correct sequence of steps for the administrator to follow after powering on the ESXi hosts?

A1. Enable cluster member updates from vCenter Server only on one ESXi host.
2. Run the python reboot helper script only on one ESXi host to recover the cluster.
3. Exit all hosts from maintenance mode.

B1. Exit all hosts from maintenance mode.
2. Run the python reboot helper script only on one ESXi host to recover the cluster.
3. Enable cluster member updates from vCenter Server on all ESXi hosts.

C1. Exit all hosts from maintenance mode.
2. Enable cluster member updates from vCenter Server only on one ESXi host.
3. Run the python reboot helper script only on one ESXi host to recover the cluster.

D1. Enable cluster member updates from vCenter Server on all ESXi hosts.
2. Run the python reboot helper script on all ESXi hosts to recover the cluster.
3. Exit all hosts from maintenance mode.

Answer : A

Question 2

A customer has deployed a new vSAN Cluster with the following configuration:

vSAN 8 is deployed with ESA.

VMs are configured with a RAID-5 VM policy.

During failure testing, before the new platform is placed into production one of the ESXi hosts is made unavailable.

Which RAID-5 data placement schemes will vSAN use with this failure condition?

AvSAN can protect the platform using adaptive RAID 5 if the ESXi host fails to return

BVMware HA will migrate the storage objects to another node in the cluster

CSome VM data will be unavailable until the failed ESXi host is recovered

DThe data components on the hosts will be marked as degraded

Answer : D

Question 3

A vSAN administrator notices that the VMware Skyline Health: Network Latency Check reports indicate that three hosts are noncompliant.

Which action should the vSAN administrator take?

AImmediately reboot the non-compliant hosts

BCheck VMKNICs, uplinks, physical switches, and associated settings

CRerun the VMware Skyline Health: vSAN Cluster Partition report

DPlace the non-compliant hosts into an isolated network partition

Answer : B

Question 4

A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.

A 10GB NIC on the servers is experiencing issues, and the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Add-on.

Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?

AMake sure the vLCM image is configured to use the most recent version of the Vendor Add-on

BAdd an individual component to the vLCM image that has the updated NIC driver

CRemove the Vendor Add-on from the vLCM image, and then manually install the network driver on the servers

DModify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver

Answer : B

Question 5

A vSAN administrator needs to update vSAN from version 7.0.2 to version 8.0.

Which is the correct order to perform the update?

AvSphere -> vCenter -> vSAN on-disk format

BvSphere -> vSAN on-disk format -> vCenter

CvCenter -> vSphere -> vSAN on-disk format

DvSAN on-disk format -> vSphere -> vCenter

Answer : C

Question 6

A customer wishes to host a new range of applications with high-performance requirements, specifically, low latency. The current vSAN platform is based on ReadyNode hardware and uses a vSAN 7.0 U2 hybrid topology configuration.

Which would satisfy the customer's requirement?

ADeploy the application on a new cluster with vSAN 8.0 ESA using a new hardware design

BDeploy the new applications on the existing cluster with a RAID-6 VM storage policy and an additional stripe width of 4

CDeploy the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration

DPerform an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA

Answer : A

Question 7

What are two prerequisites for using the TRIM and UNMAP capability of vSAN? (Choose two.)

ADeduplication and compression are enabled.

BThe vSAN cluster is an all-flash architecture.

CThe VM quest operating system supports ATA TRIM or SCSI UNMAP capability

DTRIM and UNMAP is enabled.

EChange the Object Space Reservation to 100.

Answer : B, C

VMware vSAN Specialist v2 5V0-22.23 Exam Questions